Name: ClearTop Pour-On Epoxy - 128 fl oz
Brand: J-B Weld
SKU: 41128

a pizza sitting on top of a wooden table

Strength

Resists Scratches & Impact

Set Time

5 hours

Cure Time

24 hours

Cure Color

Clear

Add To Cart

J-B Weld ClearTop is a two-part pour-on epoxy that is specially formulated for coating projects on tables, bartops, and other surfaces. When properly mixed and applied, ClearTop cures crystal clear with a durable finish that resists scratches, impact, and hot objects up to 150°F.

SG赛车官方开奖直播

Tabletops
Bartops
Countertops

SG赛车开奖直播软件

Wood & More

Get The Safety Data Sheet

For California residents only, check here for warning

SG赛车网站

Prepare

Measure & Mix

Pour

Cure

SG赛车开奖结果

Make sure temps are above 75º with humidity below 60%. Clean surface of dust and debris, ensuring work area is dry and dust-free. Cover area around project with sheeting to catch any drips. Bond any objects to be embedded to the surface.

SG赛车最快开奖

Pour equal parts of Part A (Resin) and Part B (Hardener) into separate measuring cups with a 1:1 ratio.

Pour Hardener (Part B) into mixing cup first, then add Resin (Part A), scraping sides and bottoms to ensure equal proportions. Mix thoroughly with stir stick for 3-5 minutes, scraping the sides and bottom of container for proper mixing.

Pour mixed product into second mixing cup, scraping all product from sides and bottom. Thoroughly mix for an additional 1-2 minutes. Let mixture sit for 3 minutes.

SG赛车开奖号码

Apply initial seal coat - a thin layer that will reduce air bubbles - by pouring mixture across surface in a zig-zag motion, and then spread with a squeegee. Remove any air bubbles with heat. Let dry for 3-5 hours.

Apply flood coat - pour the mixture across the entire surface (mixture will self-level). Use rubber squeegee or brush to guide.

Remove air bubbles with a heat gun or hair dryer, sweeping across entire surface at a 45º angle to pop bubbles.